Sony today announced the launch of two new camera power supply solutions for the Alpha series, a part of Cinema Line cameras using NP-FZ100 battery to meet the growing needs of creators: the BC-ZD1 battery charger which charges two batteries simultaneously and the DC-C1 DC coupler that supplies power directly to the camera body from an external power source.
The BC-ZD1 is a high-speed charger for Sony’s high-capacity NP-FZ100 batteries[i]. It can simultaneously charge two batteries in approximately 155 minutes[ii] (full charge[iii]) when connected to a USB Power Delivery (PD) compatible power supply with 30W or higher output and a USB cable with USB PD support (3 A) or higher current.
The DC-C1 DC coupler[iv] provides continuous, reliable power to cameras compatible with NP-FZ100 or NP-FW50 rechargeable battery packs using an external power source such as a USB PD (65 W or more) compatible AC adapter and USB cable with USB PD support (5 A), allowing for a stable power supply during long shoots or streaming.
By expanding its range of power solutions, including genuine battery products, Sony aims to enable extended photo and video shooting, contributing to a more efficient workflow for creators.
BC-ZD1 Main Features
- Charges two NP-FZ100 batteries simultaneously and fast when connected to a USB PD compatible power supply1
- Two NP-FZ100 batteries can be quickly charged in approximately 155 minutes2 (fully charged3)
- Equipped with an indicator lamp that shows the battery charging status in 5 stages
- Compact size for easy portability: Width approx. 84.5 mm x Height approx. 29.2 mm x Depth approx. 70.0 mm, weight approx. 149g[v]
- For safely charging two NP-FZ100 batteries simultaneously and fast, with ample heat dissipation measures plus heat monitoring and control built in
DC-C1 Main Features
- DC coupler4 supplies power directly from an external power source such as a USB PD compatible AC adapter (65 W or more) to a camera body that supports NP-FZ100 or NP-FW50
- To prevent accidental cable disconnection, the DC-C1 is equipped with the locking screw hole[vi], or an anchor loop can be used to secure the cable to the USB port
- 1.6 m cable connects plug-in plate to the power supply assembly for flexible setup during shooting
- Equipped with Power Indicator Lamp that shows the power supply status
- Compact and lightweight design for easy portability: the power supply assembly size Width approx. 52.0 mm x Height approx. 70.6 mm x Depth approx. 32.0 mm[vii]
Availability
The DC-C1 and BC-ZD1 will be available in South Africa from November 2024.
For detailed product information about DC-C1 and BC-ZD1, please visit:
https://www.sony.com/za/electronics/interchangeable-lens-cameras-batteries-chargers/dc-c1
https://www.sony.com/za/electronics/interchangeable-lens-cameras-batteries-chargers/bc-zd1
[i] NP-FZ100 batteries, USB PD compatible power supply, and USB cable not included. Please purchase NP-FZ100 batteries, a USB PD compatible power supply with 30W or higher output, and a USB cable with USB PD support (3 A) or higher current separately.
[ii] Simultaneous two-battery charging requires a USB PD compatible power supply that can deliver 30W or higher. Single-battery charging requires a USB PD compatible power supply that can deliver 18W or higher. A USB cable that can handle 3A or more is required in both cases. Charge time may vary according to use conditions.
[iii] The CHARGE indicators will turn off when battery charge level exceeds 90% (operational charge). Continue charging for another approx. 30 minutes to achieve a full charge.
[iv] USB PD compatible power supply and USB cable not included. Requires separate USB PD (65 W or more) power supply and USB cable with USB PD support (5 A).
[v] Width approx. 3 3/8 inches x Height approx.1 3/16 inches x Depth approx. 2 7/8 inches, Weight approx. 5.3 oz.
[vi] A screw-fixed USB cable can be connected to the power supply assembly.
[vii] Width approx. 2 1/8 inches x Height approx. 2 7/8 inches x Depth approx. 1 5/16 inches.